Welcome to A. M. Industries

The cellular construction of cork, together with the inherent properties of rubber (natural & synthetic) present in "Rubber Cork" closely approaches the perfect gasket material. More than 50% of cork's volume is accounted for by air within the cork cells, hence compression does not produce lateral spread & the high strength of the cell walls ensures good recovery properties. The more flowing characteristics of rubber, it's ability to with stand high vaccums & the action of hot oils, are all desirable features of a good gasket material. All these properties are present in the range of rubber cork products manufactured by A.M.

A.M. rubber cork is produce from top quality cork intimately bonded with a synthetic rubber, which may be the SBR, nitrile or neoprene types. This provides a material in which the natural compressibility of cork is combined with the resilience & mechanical strength of rubber. Adjusting the proportions, the degree of compressibility & flow characteristics can be controlled & combinations produced which are nearly as compressible as cork or almost as incompressible as rubber. Cork bonded with the synthetic rubber such as neoprene can be used amongst other purposes for crank case & inspection doors on diesel & gas engines & for valve covers sump & oil & water pumps on internal combustion engines. It is also used for electrical transformers, control gear, switch gear & cable boxes. The material is most used at sustained operating temperatures hot exceeding 120° C. Special materials make up with silicon may used in higher temperatures, depending on environment.
Realizing this, A.M. exercises extreme care during every stage of manufacturing to guard the uniformity to the finished sheet; rigid manufacturing processes are set up & highly trained quality control constantly checks production conformance of those specifications. A.M., offers you a full range of rubber cork compositions, made of clean, selected ground cork, combined with nitrile & policloroprene binders - consistently uniform in quality & content. These similar grades range from soft to firm grade.

A.M. has unique production equipment which produces blocks. These blocks offer valuable reductions & greater yields for many users. This comes in 2 sizes 2'X3' (600mm X 900 mm) & 3' X 3' (900 mm X 900 mm) & the sheets can be splitted from thickness since 1 mm.

Anti-Vibration Pads are available in various options of solid cross-ribbed design and with variety of thickness of cork centers. The standard cork centers have a thickness of either 10 mm (3/8") or 38 mm (1.5"). With a special ribbed design of alternate heights, additional vibration isolation is achieved. Slabs are also available of Cork and Rubber independently.Rubber Cork Anti Vibro pads are available in sizes of 458 mm x 458 mm ( 18" x 18") with a thickness of 22 mm (7/8"). Smaller size pads such as 75 mm, 100 mm, 150 mm square are also available. Cork center thickness can be varied as per customer specifications. Solid Cork Slabs of standard dimensions of 600 x 900 mm are also available in a variety of thickness such as 25 mm, 38 mm , 50 mm ,75 mm, 100 mm . Thickness and Densities can be varied as per customer specifications.