Asbestos Products

Beater Sheets

 

6010- Beater Addition Jointing Sheet
Material Description

6010 is a comparatively low density, high performance gasket material designed for elevated temperature applications. It is composed of a blend of asbestos fibre, inorganic fillers & nitrile binder. This provides the material with good torque retentions when combined with a metal core. It's low density makes it ideally suitable for perforated core applications & the high compressibility imparts good flange confirmability. This material is available in light grey, red or green shade.
PHYSICAL PROPERTIES
Density
Compressibility
Recovery
Tensile Strength
 Unit
(gm/cc)
( % )
( % )
(kg/sq.cm)

 Typical Value
1.15
4-0
26
48

FLUID IMMERSIONS
WEIGHT INCREASE
A.S.T.M. Oil 3,5hrs.150° C.
A.S.T.M. Fuel B, 5hrs Room Temp
50% Anti Freeze + 50% Distilled Water 5, hrs, Room Temp.
( % )
( % )
( % )
49
45
60
SPECIFICATION COMPLIANCE
A.S.T.M. F104: 127160 E 62 M3.
TYPICAL APPLICATIONS
6010 - is a high performance, low density material for use in light to moderate duty applications. Listed below are few of the applications where 6010 is intended to be utilized.
EXHAUST MANIFOLD
ENGINE HEAD GASKETS
LIGHT FIXTURES
MAINTENANCE REPAIR OPERATIONS
PIPE FLANGES
LIGHT DUTY TRANSMISSION

AVAILABILITY
Roll Width
Roll Size O.D
Roll Weight
Core Size-ID

 Unit
(MM)
(MM)
(Kg)
(MM)		 Standard Size
1000
200-225
55-65
75 or 100
6010 is available in thicknesses from 0.4 MM, 0.6, 0.65, 0.7, 0.8, 1.0, 1.2 & 1.5 MM. Other special sizes available on request.

6030- Beater Addition Jointing Sheet
Material Description

6030 is a high performance, medium density gasket material for use in elevated temperature sealing applications. It is composed of a blend of inorganic fillers reinforced with asbestos fibres in a nitrile binder matrix. 6030 offers excellent sealability & creep relaxation combined with high temperature resistance upto 230°C. This material is available in medium dark grey shade.
PHYSICAL PROPERTIES
Density
Compressibility at 350 kg/sq.cm
Recovery (A.S.T.M. F-36
Tensile Strength (A.S.T.M.F-152)
Ignition loss % at 800 deg.Cen.(max)
ASTM Oil No.3
Wt.increase % (max)
Th.increase % (max)
ASTM Fuel No.B
Wt.increase %(max)
Th.increase % (max)
Water Absorption % (max) 		Unit
(gm/cc)
( % )
( % )
(kg/sq.cm)
(%)

(%)
(%)

(%)
(%)
(%) 		Typical Value
1.18-1.25
30
35
48-52
33

38
5

30
5.2
46
SPECIFICATION COMPLIANCE
A.S.T.M - F-104 - 125150B4E52M4
6030 is a high performance, medium density gasket material for use in elevated temperature sealing applications. It is composed of a blend of inorganic fillers reinforced with asbestos fibres in a nitrile binder matrix.6030 offers excellent sealability & creep relaxation combined with high temperature resistance upto 230°C. This material is available in medium dark grey shade.

AVAILABILITY
Roll Width
Roll Size O.D
Roll Weight
Core Size-ID

 Unit
(MM)
(MM)
(Kg)
(MM)		 Standard Size
1000
250-275
60-65
75 or 100
6030 is available in thickness from 0.4 MM, 0.5, 0.7, 0.75, 0.8, 0.9, 1.00, 1.2 MM & 1.5MM other special sizes available on request.



BACK

| Home | About Us | Products | Contact Us | Feedback | Site Map |

Website Hosting Packages & Search Engine Submission
Directory of Indian Manufacturers, Suppliers and Products : easy2source.com